The Village Church in Flower Mound came to Everhold Welding looking to get playground equipment built for their youth group’s Recreation Area. This project took two days off-site preparation and 1 day to install. While not expensive, having a way for kids to work off energy before church service is priceless! Contact Everhold Welding for…
No welding and fabrication dog, I mean job, too big or small for Everhold Welding, even this heavy duty backyard gate! The new owners of this home in Double Oak, TX found themselves with an old, rotten, wooden gate. They needed a new gate strong enough so their big dogs couldn’t get out. We welded and…
The fencing around this basketball court was rusted through, the paint was bubbling, and it needed to be replaced. We tore down the metal frame structure and removed concrete in and under the court to remove the posts. In all we replaced about 500 feet of 2 inch square tubing before rehanging the chain link…
This Everhold Welding customer had an issue with rain coming in from the side of his pergola. To remedy the situation we made a rain shade with a basic frame. We added support to the pergola with steel bracing and installed a removable rain shade. This rain shade can be removed by pulling two pins…
The homeowner wanted to extend his backyard view. The area behind his house has a set of train tracks and they like to watch the trains go by. It’s an all-around outdoor man cave. Far from a pre-made fence; this was all done on-site. The job entailed removing a standard wood 2-ply fence with a gate,…
This custom welding and fabrication job in Flower Mound, TX was in the middle of summer, The Texas heat was hotter than the sparks from my welder! At the request of a home builder / renovator, we added fence to the left and right side of the house and fixed an issue with the existing…
To bring this company’s drainage area up to code we added a third rail to the bottom all the way around their 340 foot rail. The custom welding and fabrication job took three days and four people. Each pipe had to be coped in order to get it to fit the existing pipe, and every…
